Easy Ways You Can Test Water Pressure at Home

Dealing with water pressure issues can be a real pain in the neck. Whether your shower has become a mere drizzle or your garden hose lacks its usual intensity, understanding and managing your home’s water pressure is required for getting things flowing again. The good thing is, checking your water pressure is a simple task that doesn’t require special training. Discover the simple process of testing your water pressure at home, how to decipher the results and what a professional can do to address any problems you find.

Why Is It a Good Idea to Check Your Home’s Water Pressure?

Understanding your home’s water pressure ensures a satisfying shower, but more importantly, it protects your plumbing system from damage. Just like you consistently check the oil in your car, getting a read on your water pressure once or twice a year can prevent bigger problems down the road.

After all, low water pressure is irritating, but high water pressure can actually damage your plumbing system, including pipe connections, water heaters and appliances. The risk of blowouts in flexible lines, like those connecting to your washing machine and dishwasher, is greater with high water pressure, potentially causing leaks and extensive water damage. Checking your water pressure and taking appropriate steps based on the results can help avoid these issues.

Tools You’ll Need to Test Water Pressure at Home

To get started, you need a basic and affordable tool called a pressure gauge. These are often available at hardware or home improvement retailers. When choosing a gauge, look for one with female hose threads (to easily attach to an outdoor faucet or hose bib), a rubber gasket for a tight seal and the means to measure as high as 300 pounds per square inch (psi).

Detailed Guide to Testing Water Pressure

With a pressure gauge at the ready, you’re set to test the water pressure. Just follow these steps:

1. Preparation: First, make sure that all water outlets in your residence are switched off. This consists of faucets, showerheads, dishwashers, washing machines, refrigerator ice makers and sprinkler systems. Any water usage while you are testing may influence your readings and give a false perception of low pressure.

2. Hook up the pressure gauge: Attach the gauge to an outside faucet or hose bib. If your water is derived from a municipal source, connect it to the faucet nearest to the water meter to get the most accurate reading. For homes that use a well system, attach it to a hose bib in the vicinity of the well’s pressure tank.

3. Measure the pressure: Tighten the gauge by hand and open the faucet as far as it will go. Now, examine the readout to determine the pressure. A suitable reading ranges from 45 to 55 psi. If your reading is lower than 40 psi or above 80 psi, it’s time to take action.

Resolving Water Pressure Issues

Here are the steps you should take depending on your pressure gauge reading:

  • High pressure: Put a water pressure regulator on your water main. This tool restricts your water pressure to a maximum flow of 75 psi. Even if you already have a regulator, it’s smart to review the pressure routinely, as regulators can fail without showing any signs.
  • Low pressure: First, examine any existing pressure regulators, which should be set to about 50 psi. Adjusting the screw on top should strengthen the flow. If a pressure regulator isn’t the culprit, the problem might be with the municipal water supply. In instances like this, setting up a water pressure booster may help.
  • Normal pressure: If your pressure falls in the recommended range, no further action is needed. Just keep in mind to test your water pressure occasionally to ensure it continues to be within this range.

When to Reach Out to a Pro for Water Pressure Problems in Winnipeg

If you’re not feeling very confident about testing the water pressure in your own home, or if you’ve found an issue that calls for professional repair, don’t hesitate to call Winnipeg Supply Service Experts. Our talented plumbers can help you test your water pressure, diagnose what’s wrong and check to be sure that no fixtures have been harmed by high pressure. We can also help with putting in a pressure regulator or booster if needed. Thanks to our 100% satisfaction guarantee, you can count on us to make the correct fix the first time around. The next time you encounter water pressure problems or other plumbing challenges in Winnipeg, call Winnipeg Supply Service Experts to schedule an appointment. We’re here to help!

Enjoy our blogs!

Keep checking back for more!